Table of Contents
Advertisement
To adjust the size and position automatically:
To automatically adjust these settings, perform one of the following:
•
Click the Auto-Image button (see
one-time Auto-Image.
•
Click the Auto-Image & Fill button (
the entire video output (ignores aspect ratio settings).
•
Click the Auto-Image & Follow button (
to maintain the aspect ratio of the input signal (ignores aspect ratio settings).
Audio Configuration Page
On the Audio Configuration page (see figure 47), you can configure audio inputs and
outputs.
Click the Audio Configuration icon on the global navigation bar to open the Audio
Configuration
Figure 47.
Audio input configuration
Audio Format
From the Audio Configuration panel, select the input Audio Format from the
drop-down lists (see figure 47,
For inputs 1 and 2, available formats include:
•
None
•
Analog
audio is sent to the output.
For input 3, available formats include:
•
None
•
Analog
input is sent to the output.
•
LPCM-2Ch
•
Multi-Ch
multi-channel audio is not available, 2-channel LPCM audio is passed to the digital
outputs.
page (see
figure
35,
1
Audio Configuration Page
), then set the input gain to optimal settings.
1
— Audio is not sent to the output.
— Analog TRS 1 (default for input 1), TRS 2 (default for input 2), and TRS 3
— Audio is not sent to the output.
— Analog TRS 1, TRS 2, and TRS 3 audio from the corresponding analog
— The digital input is configured to receive 2-channel LPCM audio.
— The digital input is configured to receive multi-channel audio. If
DSC 301 HD • Product Configuration Software
figure
46,
, on the previous page) to perform a
3
) to perform a one-time Auto-Image and fill
4
) to perform a one-time Auto-Image and
5
, on page 50).
5
2
61
Advertisement
Table of Contents
