Trouble Conditions; Check" And "Battery" Displays - ADEMCO Security System VISTA-10SE User Manual

T
"Check" and he word CHECK on the keypad's display, accompanied by a "beeping" at the keypad,
"Battery" Displays indicates a trouble condition in the system.
To silence the beeping for these conditions, press any key.
1. A display of "CHECK" and one or more zone numbers indicates that a
2. If there are wireless sensors* in your system, the CHECK condition may
* Not all systems use
wireless sensors.
IF YOU CANNOT CORRECT A
"CHECK" DISPLAY, OR IF IT IS FOR
A FIRE ZONE, CALL FOR SERVICE
IMMEDIATELY.

TROUBLE CONDITIONS

problem exists with the displayed zone(s) and requires your attention. If the
CHECK display relates
IMMEDIATELY.
Determine if the zone(s) displayed are intact and make them so if they are not. If the
problem has been corrected, the display can be cleared if you enter the OFF se-
quence (security code plus OFF key) twice. If the display persists, CALL FOR
SERVICE .
also be caused by some change in the environment that prevents the receiver from
hearing a particular sensor. CALL FOR SERVICE if this occurs.
– 2 6 –
to a fire zone, CALL
TYPICAL
"CHECK" DISPLAYS
CHECK 06 FRONT
UPSTAIRS BEDROOM
ALPHA
06
CHECK
FIXED-WORD
FOR SERVICE
AC