Power Supply; Optional Hardware; Hard Disk Drives; Intel ® Local Control Panel - Intel S5000PSLSATA User Manual

Power Supply

A minimum of 550 Watts is required. Your supply must provide a minimum of 3A of 5V
standby current or the board will not boot.

Optional Hardware

Hard Disk Drives

The server board supports different hard disk drive options, depending on the version of
the server board purchased.
•
The Intel
ports and one IDE connection. The six SATA ports are near the front left side of the
server board. The IDE connection supports one or two ATA-133 devices. IDE
devices can be connected to the standard IDE connector located near the SATA
ports.
•
The Intel
and one IDE connection. The four SAS ports are near the front left side of the server
board. The IDE connection supports one or two ATA-133 devices. IDE devices can
be connected to the standard IDE connector located near the SAS ports.
•
The Intel
ports, one IDE connection and an LSI Logic* LSI20320-R-B single channel Ultra
320 SCSI controller.
See the documentation included with your server chassis for additional drive information
and drive installation instructions.
®
Intel Local Control Panel
The Intel
display, which provides additional controls and indicators beyond the standard control
panel.
®
Intel Server Board S5000VSA User's Guide
®
Server Board S5000VSASATA/S5000VSASATAR provides six SATA
®
Server Board S5000VSASAS/S5000VSASASR provides four SAS ports
®
Server Board S5000VSASCSI/S5000VSASCSIR provides six SATA
®
Local Control Panel provides enhanced system control by utilizing a LCD
11