Transferring Files Between The Primetab And A Pc - TrekStor PRIMETAB P10 Operating Instructions Manual

i NOTICE
You may also have to confirm the pairing procedure on the device you want to
connect to.
g) Once a connection has been established, the connected device appears at
the very top of the Primetab Bluetooth menu under the heading "Paired
devices".
h) Exit Settings by returning to the start screen (see Section 9).
i) Open the file explorer app ("File Manager") in the Applications menu.
j) Scroll to the image you want to send via Bluetooth.
k) Tap the image to open it.
l) The Bluetooth symbol is located in the upper right of the image:
m) Tap the symbol. A list of all connected Bluetooth devices appears.
n) Tap the device you want to send the image to. The Primetab will send the
selected file to the required device.
o) You may have to confirm receipt of the image on the destination device.
NOTICE
i
Deactivate the Bluetooth function on both devices after successful transfer in
order to save power. To deactivate the Bluetooth function on the Primetab, in
the Bluetooth menu top right, use the tip of your finger to move the slider for
Bluetooth from right to left. The word "Off" appears in the top left of the screen.

Transferring files between the Primetab and a PC

a) Connect the Micro-USB plug of the USB 2.0 cable supplied to the Micro-
USB socket of the Primetab and the USB plug of the cable with a USB
socket on your PC.
NOTICE
i
Make sure when connecting the Primetab that it is not in stand-by mode and
the screen is unlocked. If stand-by mode is enabled or the screen is locked, data
transfer is not possible for security reasons.
b) A few moments later, the internal memory of the Primetab will be
displayed on the left as a drive in the file browser of your PC.("PrimeTab").
c) Click "PrimeTab" on the left in the file browser of your PC and then in the
centre "Internal Storage". All files in the internal memory of the Primetab
will be displayed.
29