Transferring Iles Between The Surftab And A Pc; Reset And Recovery Mode; Resetting The Surftab (Reset) - TrekStor SURFTAB BREEZE 10.1 QUAD 3G Operating Instructions Manual

Transferring files between the Surftab and a PC
a) Connect the Micro-USB plug of the USB 2.0 cable supplied to the Micro-
USB socket of the Surftab and the USB plug of the cable with a USB
socket on your PC.
NOTICE
Make sure when connecting the Surftab that it is not in stand-by mode and
the screen is unlocked. If stand-by mode is enabled or the screen is locked, data
transfer is not possible for security reasons.
b) A few moments later, the internal memory of the Surftab will be displayed
on the left as a drive in the ile browser of your PC.("S
c) Click "S T " on the left in the ile browser of your PC and then in the
centre "I
will be displayed.
d) Click the folder containing the ile you want to copy.
e) Right-click the ile you want to copy. The context menu opens as a drop-
down window. Click "C
f) Click "T PC" on the left in the ile browser of your PC and double-click
on the required destination folder to open it.
g) Right-click a free area in the destination folder. The context menu appears.
h) Click "P
folder.

22. Reset and recovery mode

Resetting the Surftab (Reset)

If the Surftab "freezes" and no longer responds, you can reset it.
a) Call up Settings (see Section 12).
b) In Settings, tap "
c) Tap "F
d) Tap "R
e) Tap "C
WARNING
Saved files will not be lost if the Surftab is reset.
S ". All iles in the internal memory of the Surftab
" in the context menu.
" in the context menu. The ile will be copied to the selected
&
" on the following screen.
" in the bottom centre.
A "
"
31
T ").