TrekStor PRIMETAB P10 Operating Instructions Manual page 15

A setup assistant appears directly after the tablet has started up for the first
time. Follow the setup assistant's instructions to set up your Primetab.
During the setup process, the setup assistant will prompt you to sign in
with your Google account. In order to make full use of all the features of the
Primetab, we highly recommend that you sign in with your Google account at
this point.
i
NOTICE
If you have set up an identification method for your Primetab (see Section 13),
you will then have to use this method to unlock the screen.
Your Primetab will be configured once you complete the setup process. This may
take a few minutes. Do not switch off the Primetab during this period!
Each time you turn on the Primetab after setting it up, the lock screen will
appear during start up. To unlock the screen, drag the lock screen upwards from
bottom to top with your fingertip.
i
NOTICE
If you have set up an identification method for your Primetab (see Section 13),
you will then have to use this method to unlock the screen.
15