TrekStor PRIMETAB P10 Operating Instructions Manual page 34

Why is my WiFi not shown in the list of available wireless networks on my
Primetab?
Firstly, make sure that you have enabled the WiFi function on your Primetab
and that you are within range of the network.
If the required network is still not showing in spite of these steps, it may be that
visibility of the network has been restricted in the router settings ("suppressed
SSID").
Check if this is the case in the router settings.
To connect to a network with suppressed SSID, go to the WiFi menu
via Settings and tap the three bullet points in the WiFi menu top right.
Tap "Add network" in the drop-down window that appears,
enter the network SSID and tap "Save".
Why does my Primetab just switch off sometimes?
If the energy level of the battery falls below a critical level, the Primetab displays
a corresponding warning.
If you ignore these warnings, the Primetab will turn off in order to counteract
total discharge of the battery.
Total discharge can lead to a situation where it is no longer possible to charge
the Primetab. For this reason, connect the tablet to the charger at this point at
the latest in order to prevent data loss and damage to the battery.
My Primetab won't switch on. What can I do?
The battery may not be sufficiently charged to allow the Primetab to switch on.
Connect the Primetab to the charger (see Section 8) to recharge the battery.
What can I do if the internal storage of my Primetab is full or almost full?
To relieve the pressure on the internal storage of your Primetab and free
up storage space, you can transfer media files stored on the Primetab (for
example, images, videos or text files) to an external storage device (for example,
a USB stick or suitable memory card) or you can delete apps that you no longer
require.
Can I install apps that I have downloaded onto my Primetab on external
storage devices (such as SD cards, a USB stick etc.)?
No, this is not possible. You can install apps only on the Primetab.
34