Transferring Iles Between The Surftab And Other Devices; Transferring Iles Via Bluetooth - TrekStor SURFTAB TWIN 10.1 Operating Instructions Manual

19. Transferring files between the Surftab and other devices
Transferring files via Bluetooth
a) Enable the Bluetooth function on the device you want to connect and make
the device visible to other devices if necessary. To do so, refer to the operating
instructions of the device to be connected.
b) Call up the settings (see Section 13).
c) In Settings, tap "D
d) Drag the Bluetooth slider (in the centre of the screen) with from left to
right. The word "O " appears next to the slider. This activates the Surftab
Bluetooth function.
e) Tap "A B
The Surftab searches for available devices nearby.
f) Select the device you want to connect from the list of devices available by
tapping the name of the device.
g) The Surftab sends a veri ication code to the device to be connected. Check
that the code displayed on the device to be connected matches the code
displayed on the Surftab and con irm on the tablet by tapping "Y ".
ADVICE
You may also have to confirm the pairing procedure on the device to be
connected.
h) The status message "P
successful pairing.
i) Exit the device settings by closing the window. To do this, click the "x"
symbol at the top right of the display.
j) Open the ile browser by tapping the folder symbol on the task bar and go
to the ile that you would like to send.
k) Set a check mark to the ile to be sent. Click the right mouse button, the
context menu opens.
l) Tap "S
list of all paired Bluetooth devices appears.
m) Tap the required device and con irm with "N
selected ile to the required device.
n) You may have to con irm receipt of the ile on the destination device.
" and in the following window tap "B
" on the left.
" appears under the selected device after
" on the context menu and then tap "B
" and than choose "B
". The tablet now sends the
28
&
".
". A