Cleaning Connectors And Adapters; Cleaning Bulkhead Connectors (Sources And Patch Panels); Cleaning The Meter's Connector; Cleaning Fiber Adapters - Fluke SimpliFiber Pro User Manual

Cleaning Connectors and Adapters

Always clean and inspect fiber connectors before making
connections. Use fiber optic solvent and optical-grade wipes
or swabs to clean connectors as follows:
Cleaning Bulkhead Connectors (sources and
patch panels)
1 Touch the tip of a fiber optic solvent pen or swab
soaked in solvent to a lint-free dry wipe or fiber
cleaning card.
2 Touch a new, dry swab to the solvent spot on the wipe
or card.
3 Push the swab into the connector, twist it around 3 to 5
times against the end-face, then remove and dispose of
the swab.
4 Dry the connector with a dry swab by twisting it
around in the connector 3 to 5 times.
5 Inspect connectors with a fiber microscope, such as the
Fluke Networks FiberInspector
before making connections.
™
Video Microscope
Cleaning Connectors and Adapters

Cleaning the Meter's Connector

1 Remove the connector adapter to expose the
photodiode lens (see Figure 4).
2 Use the method described in steps 1 and 2 above to
dampen a swab with solvent.
3 Twist the damp swab around against the lens 3 to 5
times; then twist a dry swab around against the lens 3
to 5 times.

Cleaning Fiber Adapters

Periodically clean fiber adapters with a swab and fiber optic
solvent. Dry with a dry swab before use.
15