Fuji Xerox DocuPrint CP405 d User Manual page 52

Paper/Output Tab Settings
This section describes the settings in the [Paper/Output] tab.
NOTE:
• You can restore defaults by clicking [Defaults].
• You can restore all items to their defaults by clicking [Default All].
• Settings
Job Type
Specify the job type.
NOTE:
• [Secure Print] and [Sample Set] are displayed only when [Hard Disk] or [RAM Disk] is set to [Installed] in the [Installable
Options] dialog box. (For the DocuPrint CM405 df, [RAM Disk] is set to [Installed] by default.)
• [Normal Print] *
Select to print normally.
• [Secure Print]
Accumulates data specified to be printed within the printer, and outputs by the instruction from the printer when
printing. Click [Setup], and set each item on the [Secure Print] dialog box displayed. See Secure Print dialog
box on page 52.
• [Sample Set]
When printing multiple copies, you can print only one set initially to confirm the print result, and then the
remaining sets are output by an instruction from a printer. Click [Setup], and set each item on the [Sample Set]
dialog box displayed. See Sample Set dialog box on page 53.
Secure Print dialog box
User ID
Enter the User ID for Secure Print. Enter the User ID within 8 characters.
52
Print Driver Settings