Fuji Xerox DocuPrint CP405 d User Manual page 49

Installable Options dialog box
To print correctly, it is necessary to make the appropriate settings in this dialog box.
Select the items in [Items] and then select the settings from the drop-down list box of [Setting for].
NOTE:
• You can restore defaults by clicking [Defaults].
Hard Disk
Specify if the optional hard disk unit is installed in the printer.
• [Installed]
• [Not Installed] *
RAM Disk
Specify if the RAM disk is installed in the printer.
• [Installed]
• [Not Installed] *
NOTE:
• For the DocuPrint CM405 df, [Installed] is the default setting. For the DocuPrint CP405 d, select [Installed] when the optional
512MB memory is installed on the printer.
Memory Capacity
Specify the amount of printer memory.
• [256MB] *
• [512MB]
• [768MB]
• [1024MB]
NOTE:
• For the DocuPrint CM405 df, [256MB] is not available and [512MB] is the default setting.
Paper Tray Configuration
Specify the paper tray configuration of the printer.
• [1 Tray] *
• [2 Trays]
Accounting button
The [Accounting] dialog box is displayed. You can setup accounting for your printer.
Accounting dialog box
You can specify whether to enable accounting and set user authentication settings.
NOTE:
• You can restore defaults by clicking [Defaults].
Accounting System
Specify whether to enable accounting when printing.
• [None]
• [Standard Accounting or Auditron] *
Print Driver Settings
49