Planar Dome EX User Manual page 34

Dome E5 Specification
Model 933-0544-00
In locations where 240V outlets are used, connect the Dome E5 display to only a center-
tapped, 240V, single-phase supply (only for Canada and the United States).
Category
Screen
Interface
Input formats
Physical
Power
24 | Dome EX Display
Characteristic Item
Screen size diagonal
Resolution
Pixel pitch
Pixel arrangement
Active area (mm)
Grayscale supported
Refresh rate
Contrast ratio
Brightness
Pixel rise/fall time
Viewing angle
Digital Video In
Display control - brightness/
contrast
Display identification
USB hub
Display status
Landscape orientation
Portrait orientation
VGA to XGA/SXGA
Screen type
Display size (without stand)
Display weight (without stand)
Mounting options
Adapter
Specification
510 mm (20.1 in.)
2048 x 2560 pixels (portrait)
2560 x 2048 pixels (landscape)
0.156 mm, 163 ppi
Subpixel vertical stripe
399.4 (H) x 319.58 (V)
3061 shades of gray
60 Hz
600:1 (typical)
2
850 cd/m (typical)
30 ms (typical)
170° (± 85°) horizontal/vertical
DVI Rev. 1.0 single digital channel connector
DDC2B+
EDID read using DDC2B+
Universal Serial Bus (USB) Rev. 1.1:
1 uplink B port; 2 downlink A ports
Dual-stack tricolor LEDs on back panel
2560 x 2048 (8-bit per pixel)
2048 x 2560 (8-bit per pixel)
640 x 480 to 1024 x 768, 1280 x 1024 displayed in
both landscape and portrait rotations
AMLCD (active-matrix liquid crystal display)
362 mm x 442 mm x 103 mm
(14.3 in. x 17.4 in. x 4.1 in.)
5.9 kg (13 lb)
Desktop stand (standard);
100-mm VESA mounting (optional)
Ault MW122RA1223F52 (CAUTION: Use only the
power adapter supplied with the display unit.)