Planar Dome EX User Manual page 19

Connect the Video and Power Cables
Turn your computer off. Leave the power cord plugged into
the grounded outlet. Use the Dome EX display with the power
adapter and video cable shipped.
For the Dome E2 display, the power adapter is the
Ault MW116KA1249F53.
For the Dome E3, Dome E3c, and Dome E5 displays, the power
adapter is the Ault MW122RA1223F52.
To connect the cables
1 Plug one end of the DVI cable into the DVI port on the interface
plate. Secure the connection.
2 Plug the power cord into the power input port on the
interface plate.
3 Plug the other end of the DVI cable into the Video 1 port on
the installed display controller. Secure the connection.
4 Plug the other end of the power cord into the power supply.
5 Plug the power supply cord into a grounded AC outlet.
Connect the power cord and
DVI cable to the interface plate
on the back on the display.
Connect one or two displays to
the controller board installed in
your computer.
Installing the Display | 9