Table of Contents
Advertisement
Mechanical Characteristics
Figs. 6 shows the mechanical dimensions of a EL320.256-FD7 display unit.
Table 8. Display External Dimensions.
Height
Width
Depth
Weight
The EL320.256–FD7 is mechanically compatible with existing Planar
MD320.256 and EL320.256 displays
Table 9. Display Viewing Area Characteristics.
Active Area
millimeters (inches)
Pixel Pitch
millimeters (inches)
Pixel Size
millimeters (inches)
Pixel fill factor
Pixel Matrix
CAUTION: The ambient temperature of the display should not be allowed to
exceed the environmental specifications (see page 9). In most applications, an
air gap of min5 mm is recommended (see mechanical drawings). Some
applications may require, however, a larger air gap or cooling of the display
unit in the system. Note that this may slightly increase the total depth of the
design.
WARNING: The product generates potentially dangerous voltages capable of
causing personal injury (high voltage pulses up to 195 Vac). Do not touch the
display electronics during operation!
ELECTROSTATIC CAUTION: The Planar display uses CMOS and power MOS-
FET devices. These components are electrostatic sensitive. Unpack, assemble
and examine this assembly in a static-controlled area only. When shipping
use packing materials designed for protection of electrostatic-sensitive
components
110 mm
4.33 in.
130 mm
5.12 in.
33.0 mm
1.30 in.
310 g max.
10.9 oz. max
height
76.7 (3.02)
width
95.9 (3.77)
height
0.30 (0.012)
width
0.30 (0.012)
height
0.24 (0.009)
width
0.24 (0.009)
64%
320 horizontal by 256 vertical
EL320.256-FD7 Operations Manual (020-0353-00A)
11
Advertisement
Table of Contents
