SERVICE INSTRUCTIONS FOR HELLENBRAND COMPRESSOR
CAUTION:
CAUTION:
premature failure. To avoid frequent repairs follow the recommended
assembly procedures.
This kit includes the following parts:
NOTE:
assemble the necessary tools. You will need:
#2 Phillips bit for torque wrench (head and valve screws)
1/8" Hex wrench bit for torque wrench (eccentric set screw)
Torque wrench (18-55 inch pounds)
Clean cloths
23
SERVICE KIT PART NUMBER–110350
MODEL 110350
COMPRESSOR SERVICE KIT
Unplug/disconnect all electrical power prior to
beginning disassembly.
Improper assembly or use of damaged parts may lead to
10040 Connecting Rod Assembly
Before you begin, read these instructions thoroughly and
10042 Flapper Screw (x2)
10043 Valve Restraint
10056 Valve Flapper, flat
10028 Valve Flapper, curved
10051 Head O-ring
10050 Cylinder O-Ring
(x2)
10000 Filter, Foam
Part No.110350 REV. 1 08/13