Vivax ACP-07CIFM21AERI User Manual page 306

1.Mode botton:
When press this botton,the operation mode change as the following sequence:
Remark: For the cooling only model, the heating mode is skipped.
2.Timer on button :
Press this button, timer on function is active. Then every press, the time increase 0.5h, after 10h, 1h increase-
ment after each press. If cancel this Function, just set it to "0.0" .
3.Timer off button:
Press this button, timer off function is active.Then every press, the time increase 0.5h, after 10h, 1h increase-
ment after each press. If cancel this function, just set it to "0.0" .
4.Follow me button :
When under cool, heat and auto mode, press this button, follow me function is active. Pressing the ON/OFF
button or MODE button will not cancel the Follow me feature. This function is disable when the unit is off or under
DRY or FAN mode. Pressing the FOLLOW ME button again will cancel the follow me feature.
5.Electrical heater button :
If press this button in heat mode, electri-cal heater function become ineffective.
6. Reset button(hidden):
Use a 1mm stick to press in the little hole, then the current setting is canceled. The wire controller enter into
original state.
7.ON/OFF button:
When in off state, press this button, the indicator is on, the wire controller enter into on state, and send setting
information to in door Pcb. When in on state,press this button, the indicator is off, and send instruction. If timer on
or timer off has been set, it concel this setting then send instruction to stop the machine.
8. Adjust button ▲:
Set indoor temperature up. If press and hold on, it will increase at 1°C(2°F) per 0.5 second.
9.Adjust button ▼ :
Set indoor temperature down. if press and hold on, it will decrease at 1°C(2°F) per 0.5 second.
10. Swing button:
First press, start swing function;second press, stop swing. (Match to some model with swing function).
11. Economy operation button :
press this button, the indoor unit operates in economy mode, press again, exit this mode (it may be ineffective for
some models)
12. Fan speed button:
press this button consecutively, the fan speed will circle as follow:
13. Lock button(hidden):
When you push the LOCK button, all current settings are locked in and the wire controller does not accept any
operation except that of the LOCK button. Use the lock mode when you want to prevent setting from being
changed accidentally or play fully. Push the LOCK button again when you want to cancel the LOCK mode.
5