Cisco XR 12000 Series Configuration Manual page 97

Implementing Multicast Routing on Cisco IOS XR Software Cisco ASR 9000 Series Routers
neighbor 2013::122:1:1:2
remote-as 2
address-family ipv6 unicast
route-policy pass-all in
route-policy pass-all out
!
!
!
!
router ospf 100
router-id 9.9.9.9
area 0
interface Loopback0
!
interface FastEthernet0/4/1/0
!
!
!
router pim vrf vpn1 address-family ipv4
rp-address 192.168.10.1
!
router pim vrf vpn1 address-family ipv6
rp-address ::192:168:10:1
!
router pim vrf default address-family ipv4
rp-address 1.1.1.1
!
end
CE2:
For information about configuring the CE router, using Cisco IOS software, see the appropriate Cisco
IOS software documentation.
!
interface Loopback0
ipv4 address 122.122.122.122 255.255.255.255
!
interface GigabitEthernet0/5/0/0
ipv6 address 2013::80:1:1:2/126
!
interface GigabitEthernet0/5/0/1
ipv6 address 2013::122:1:1:2/96
!
multicast-routing
address-family ipv4
interface all enable
!
address-family ipv6
interface all enable
!
!
!
route-policy pass-all
pass
end-policy
!
router bgp 2
bgp router-id 122.122.122.122
address-family ipv6 unicast
redistribute connected
!
neighbor 2013::122:1:1:1
remote-as 100
OL-
Configuration Examples for Implementing Multicast Routing on Cisco IOS XR Software
Multicast Configuration Guide
MCC-89