Cisco XR 12000 Series Configuration Manual page 92

Configuration Examples for Implementing Multicast Routing on Cisco IOS XR Software
rp-address ::192:168:10:1
!
router pim vrf default address-family ipv4
rp-address 1.1.1.1
!
end
CE2:
For information about configuring the CE router, using Cisco IOS software, see the appropriate Cisco
IOS software documentation.
!
interface Loopback0
ipv4 address 122.122.122.122 255.255.255.255
!
interface GigabitEthernet0/5/0/0
ipv6 address 2013::80:1:1:2/126
!
interface GigabitEthernet0/5/0/1
ipv6 address 2013::122:1:1:2/96
!
multicast-routing
address-family ipv6
interface all enable
!
!
route-policy pass-all
pass
end-policy
!
router eigrp 2
address-family ipv6
router-id 122.122.122.122
default-metric 1000 100 250 100 1000
redistribute connected
interface GigabitEthernet0/5/0/1
!
!
!
router pim vrf default address-family ipv6
dr-priority 2
rp-address ::192:168:10:1
!
end
Configuring an IPv6 Multicast VPN to Advertise Routes Between the PE to CE with BGP as the
Protocol: Example
CE1:
For information about configuring the CE router, using Cisco IOS software, see the appropriate Cisco
IOS software documentation.
!
interface Loopback0
ipv4 address 101.101.101.101 255.255.255.255
!
interface GigabitEthernet0/5/0/0
ipv6 address 2013::90:1:1:2/126
!
Multicast Configuration Guide
MCC-84
Implementing Multicast Routing on Cisco IOS XR Software Cisco ASR 9000 Series Routers
OL-