Detaching And Refitting The Charger Roller Unit - Kyocera ECOSYS P4035dn Service Manual

*: When you place the drum unit removed
from the printer, be careful of handling not
to change the guides and the pulleys.

(2) Detaching and refitting the charger roller unit

Procedure
1. Release the lock lever and then remove
the charger roller unit.
2. Check or replace the charger roller unit
and refit all the removed parts.
Drum unit
Figure 1-5-35
Lock lever
Figure 1-5-36
1-5-20
2P7/2R0/3PN
Separation needle
Pulley
Guide film
Charger roller unit
Drum unit