Saving Station Presets; Naming Station Presets; Listening To Station Presets - Pioneer VSX-818V-K Operating Instructions Manual

Using the tuner

Saving station presets

If you often listen to a particular radio station,
it's convenient to have the receiver store the
frequency for easy recall whenever you want to
listen to that station. This saves the effort of
manually tuning in each time. This unit can
memorize up to 30 stations, stored in three
banks, or classes, (A, B and C) of 10 stations
each. When saving an FM frequency, the MPX
setting (see Improving FM stereo sound on
page 46) is also stored.
CD R
CD FM AM RECEIVER
STEREO/
AUTO/DIRECT STANDARD ADV SURR
A.L.C.
ACOUSTIC SOUND
PHASE
EQ DIALOG RETRIEVER
CH SEL LEVEL
MUTE
MASTER
VOLUME
RECEIVER CONTROL
+
CH
ONE TOUCH
COPY
AV TUNE
T.EDIT
PARAMETER
MENU
TOP MENU
ST ST
ENTER
GUIDE
-
CH
PTY SEARCH
TUNE
SETUP RETURN
1 Tune to a station you want to memorize.
See Listening to the radio on page 46 for more
on this.
2 Press T.EDIT ( TUNER EDIT ).
The display shows ST. MEMORY, then a
blinking memory class.
3 Press CLASS ( SHIFT +2) to select one of the
three classes then press ST
select the station preset you want.
You can also use the number buttons.
4 Press ENTER .
After pressing ENTER, the preset class and
number stop blinking and the receiver stores
the station.

Naming station presets

For easier identification, you can name your
station presets.
Note
1 If the receiver is left disconnected from the AC power outlet for over a month, the station memories will be lost and will have
to be reprogrammed.
1
TUNER DISP CLASS MPX D.ACCESS
ENTER
MIDNIGHT ANALOG ATT DIMMER SLEEP
SIGNAL SEL EON
INFO TV CONTROL
INPUT
SHIFT TV CH TV VOL
SELECT
RECEIVER
( ST +/– ) to
1 Choose the station preset you want to
name.
See Listening to station presets below for how
to do this.
2 Press T.EDIT ( TUNER EDIT ).
The display shows ST. NAME, then a blinking
cursor at the first character position.
3 Input the name you want.
Choose a name up to four characters long.
• Use the ST (ST +/–) buttons to select
characters.
• Press ENTER to confirm a character. If no
character is input, a space is input.
• The name is stored when ENTER is
pressed after choosing the fourth
character.
Tip
• To erase a station name, simply repeat
steps 1 to 3 and input four spaces instead
of a name.
• Once you have named a station preset,
you can press TUNER DISP (SHIFT+1)
when listening to a station to switch the
display between name and frequency.

Listening to station presets

You will need to have some presets stored to
do this. See Saving station presets above if you
haven't done this already.
1 Press FM, then press CLASS ( SHIFT +2) to
select the class in which the station is stored.
Press repeatedly to cycle through classes A, B
and C.
2 Press ST ( ST +/– ) to select the
station preset you want.
• You can also use the number buttons on
the remote control to recall the station
preset.
07
47
En