Connecting An Hdd/Dvd Recorder, Vcr And Other Video Sources - Pioneer VSX-818V-K Operating Instructions Manual

Connecting up
Windows Media and the Windows logo are
trademarks or registered trademarks of
Microsoft Corporation in the United States and/
or other countries.
Connecting an HDD/DVD recorder,
VCR and other video sources
This receiver has audio/video inputs and
outputs suitable for connecting analog or
digital video recorders, including VCRs and
HDD/DVD recorders.
1 Connect a set of audio/video outputs on
the recorder to the DVR/VCR AUDIO and
VIDEO inputs on this receiver.
Use a stereo RCA phono cable for the audio
connection and a standard RCA video cable for
the video connection.
2 Connect a set of audio/video inputs on
the recorder to the DVR/VCR AUDIO and
VIDEO outputs on this receiver.
Use a stereo RCA phono cable for the audio
connection and a standard RCA video cable for
the video connection.
3 If your video component has a digital
audio output, connect it to a digital input on
this receiver.
The example shows a recorder connected to
the DIGITAL OPT 1 (CD) input.
Note
1 If your video component also has a component video output, you can connect this too. See Using the component video jacks
on page 16 for more on this.
2 In this case, you'll need to tell the receiver which digital input you connected the component to (see The Input Assign menu
on page 64).
1
2
VSX-918V
IN
HDMI
R
IN
(DVD / BD) IN 1
IN
( ASSIGNABLE )
OUT
(TV / SAT) IN 2
IN
OUT
IN
IN
DIGITAL IN
COAX 1
OUT
(DVD / BD)
( ASSIGNABLE )
AUDIO
1 2
IN
OUT
R L R
PLAY
REC
AUDIO OUT VIDEO OUT AUDIO IN
DVR, VCR, LD player, etc.
The illustration shows the VSX-918V, but
connections for the VSX-818V are the same.
ANTENNA
AUX
FM UNBAL
L
DIGITAL IN
CD
CONTROL
OPT
OUT
2
CD-R
(TV / SAT)
/ TAPE
/ MD
IN
OPT
AM
1
LOOP
(CD)
DVD / BD
(ASSIGNABLE)
DVD SUB
FRONT
/ BD IN WOOFER
DVD5.1
PREOUT
CH INPUT
S
TV TV
MONITOR P
/ SAT
/ SAT IN OUT
E
A
DVR DVR
K
/ VCR OUT
/ VCR IN
DVR
E
/ VCR
R
S
VIDEO
3
L
COAXIAL OPTICAL
VIDEO IN DIGITAL OUT
03
R
A
15
En