Connecting A Usb Device For Advanced Mcacc Output - Pioneer VSX 1020 Operating Instructions Manual

03 Connecting your equipment
Connecting a USB device for
Advanced MCACC output
When using Auto MCACC (page 86) or
Acoustic Calibration EQ Professional (page 92)
to calibrate the reverb characteristics of your
listening room, the 3D graphs of the reverb
characteristics in your listening room (before
and after calibration) can be checked on a
computer screen.
The various MCACC parameters can also be
checked on the computer.
MCACC data and parameters can be
transferred from this receiver to a USB device
and the data imported into other devices using
a special application via a computer.
The software to output the results is available
from the support area of the Pioneer website
(http://www.pioneerelectronics.com/PUSA/
Home+Entertainment+Custom+Install).
Instructions for using the software are also
available here. If you have any questions
regarding, please contact the Customer
Support Division of Pioneer.
See the documentation provided with the
Advanced MCACC application for more
information.
Note
1 The various parameters and the reverb characteristics data used for display on the computer are not cleared when
the power is turned off (see Output MCACC data on page 96).
34
En
• For the USB device connection and
operations, see Output MCACC data on
1
page 96.
CONTROL ON / OFF
VIDEO CAMERA
iPod
iPhone
MCACC USB HDMI 5
SETUP MIC
USB mass
storage device
MASTER
VOLUME