Usb Interface - Pioneer VSX 1020 Operating Instructions Manual

Additional information

USB interface

Symptoms
The folders/files stored on
a USB memory device are
not displayed.
A USB memory device is
not recognized.
A USB memory device is
connected and displayed,
but the audio files stored
on the USB memory device
cannot be played back.
Cannot detect USB
keyboard.
Cannot enter correct text
using the USB keyboard.
Causes
The folders/files are currently stored
in a region other than the FAT (File
Allocation Table) region.
The number of levels in a folder is
more than 8.
There are more than 30 000 folders/
files stored in a USB memory device.
The audio files are copyrighted.
The USB memory device does not
support the mass storage class
specifications.
Some formats of a USB memory
device, including NTFS, and HFS,
cannot be played back on this
receiver.
The USB memory device is not
connected properly.
A USB hub is currently being used. This receiver does not support a USB hub
This receiver recognizes the USB
memory device as a fraud.
The file format cannot be properly
played back on this receiver.
The USB keyboard is routed through
a USB hub.
A PS2 keyboard is routed through a
PS2/USB connector.
Keyboard is not a USB HID Class
device.
Keyboard is not US-international
layout.
Remedies
Store the folders/files in the FAT region.
Limit the maximum number of levels in a
folder to 8 (page 45).
Limit the maximum number of folders/files
stored in a USB memory device to 30 000
(page 45).
Copyrighted audio files stored on a USB
memory device cannot be played back
(page 45).
Try using a USB memory device compatible
with the mass storage class specifications.
Note that there are cases where even the
audio files stored on a USB memory device
compatible with the mass storage class
specifications are not played back on this
receiver (page 45).
Check whether the format of your USB
memory device is either FAT 12, FAT 16 or
FAT 32. Note that the NTFS, and HFS
formats cannot be played back on this
receiver (page 45).
Check the USB memory device connection,
then switch on this receiver (page 33).
(page 45).
Switch off and on again this receiver.
See the list of file formats that can be played
back on this receiver (page 47).
This receiver is not compatible with USB
hubs. Plug the keyboard directly into the
receiver.
PS2 keyboards cannot be used with this
receiver, even if routed through a PS2/USB
connector. Use a USB keyboard.
Some devices will not be detected. Use a
USB HID Class keyboard.
Use a US-international layout keyboard.
NB: Some characters cannot be entered.
12
117
En