Manually Mounting a PTX10008
Copyright © 2017, Juniper Networks, Inc.
Figure 7: Attaching Front-Mounting Brackets
Move the lift away from the rack.
6.
Install a mounting screw into each of the open front-mounting holes aligned with the
7.
rack, starting from the bottom.
Visually inspect the alignment of the router. If the router is installed properly in the
8.
rack, all the mounting screws on one side of the rack are aligned with the mounting
screws on the opposite side and the router is level.
After ensuring that the router is aligned properly, tighten the screws.
9.
If you cannot use a mechanical lift to install the router (the preferred method), you can
install it manually.
CAUTION:
The chassis weighs approximately 145 lb (66 kg) with only the
fan tray controllers installed. Lifting the chassis and mounting it in a rack or
cabinet requires at least three people. Make sure the chassis is empty
(contains only the backplane) before you lift it.
The chassis has two handles that are designed for subtle positioning of the
chassis. Do not lift the chassis by the handles.
Manually Mounting a PTX10008
11