Setting Up Using Preset Code Search (Vsx-D710S/D810S); Setting Up Using Library Search (Vsx-D850S) - Pioneer VSX-D710S Operating Instructions Manual

Controlling the Rest of Your System
Setting Up Using Preset Code
Search (VSX-D710S/D810S)
An alternative method of setting up the remote with
preset codes is to use the search feature. The remote
transmits batches of 10 codes; when you see the
component responding you just scan through those last
10 codes until you find the correct one.
2,4
1 Switch on the component you want to
control.
If the component is some kind of player (CD player,
VCR, etc.), then start it playing.
2 Press and hold SETUP for three seconds.
The LED lights steadily for two seconds.
The remote control will also return to the previous
mode after thirty seconds of inactivity.
3 Press the MULTI CONTROL button for the
component you want to control.
Each button can be set to control one of the following
components
DVD
TV
VCR
CD
CD-R
TVC
TUN
4 Press and hold SETUP for two seconds.
A batch of 10 codes is transmitted and the LED
blinks during transmission. If you see the component
respond, by stopping (for playback components
only) or switching off, go on to the step 5, otherwise
repeat this step.
If you want to cancel the search mode, press and
36
hold MUTING for two seconds.
En
SOURCE RECEIVER LED
3
DVD TV VCR CD-R
MULTI CONTROL
TUN
RCV CD TVC
2 3
1
MIDNIGHT 5.1 / 7.1 ATT
4 5 6
EFFECT
7 8 9
10 DISC
0
ENTER
DTV INFO
MPX/RETURN D.ACCESS GUIDE
¶ 3
7 8
BAND CLASS DTV ON/OFF DTV MENU
1 ¡ 4 ¢
2
/DTS DSP TEST TONE SIGNAL SELECT
CH SELECT CH LEVEL FUNCTION
4
LOUDNESS MUTING
FL DIMMER SETUP
TUNE
6,7
ST ST
ENTER
TUNE
CHANNEL
VOLUME
MASTER VOLUME
MENU
TVFUNC
TV
TV CONTROL
DVD/LD player or DVD Recorder
TV, Satellite tuner or Cable TV tuner
VCR or Digital Video Recorder
CD player
CD Recorder, Tape deck
or MD player
TV or Cable TV tuner
FM/ AM tuner
5 Switch the component back on or restart
playback.
6 Use the % fi buttons to scan through the last 10
codes transmitted to identify the correct code.
The LED will blink during transmission of the code.
Stop when you see the component stop or switch off.
You can also verify you have the correct code by
pressing PLAY, STOP., VOL +/–, etc.
7 Press and hold ENTER for three seconds to
save the preset code.
The remote control automatically returns to normal
usuage.
Setting Up Using Full Library
Search (VSX-D850S)
An alternative method of setting up the remote with
preset codes is to use the Library Search feature. The
remote transmits batches of 10 codes; when you see the
component responding you just scan through those last
10 codes until you find the correct one.
SOURCE RECEIVER
SETUP SEARCH SEARCH LEARN ERASE
BY BRAND
DVD TV VCR
MULTI CONTROL
RCV CD TUN
1 2
MIDNIGHT 5.1 / 7.1
4 5
EFFECT
7 8
10
0
DTV INFO MPX/RETURN D.ACCESS
¶ 3
7
BAND CLASS
DTV ON/OFF
1 ¡ 4
2 /DTS DSP TEST TONE
CH SELECT CH LEVEL
2,5
LOUDNESS
FL DIMMER SETUP
TUNE
ST
ENTER
TUNE
CHANNEL
VOLUME
MENU
TVFUNC
TV
TV CONTROL
AV PRE-PROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
1 Switch on the component you want to
control.
If the component is some kind of player (CD player,
VCR, etc.), then start it playing.
2 Press and hold SETUP for three seconds.
The remote' s LCD display shows SETUP.
The remote control will also return to the previous
mode after thirty seconds of inactivity.
LED
LCD display
CD-R
4
TVC
3
ATT
6
9
DISC
ENTER
GUIDE
8
DTV MENU
¢
SIGNAL SELECT
FUNCTION
5
MUTING
3,7,8
ST
MASTER VOLUME