Coaxial Digital Input Setting - Pioneer VSX-D710S Operating Instructions Manual

Preparations
Component input 1 setting
Tells the receiver What (DVD player, etc.) is connected to
this input.
Press % or fi to select the component setting
(DVD, TV, VCR or OFF).
MEMO:
• The initial setting is "
Component input 2 setting
Tells the receiver What (TV, player etc.) is connected to
this input.
Press % or fi to select the component setting
(TV , VCR, OFF or DVD).
MEMO:
• The initial setting is "
Multi Channel External Decoder
Surround Back 1ch/2ch setting (VSX-
D810S/VSX-D850S only)
You only need to make this setting if you are using a
multi channel external decoder with your DVD player. If
you aren't just ignore this setting.
Press % or fi to select the channel setting.
Select 1ch if your DVD is outputting 6.1
sound (the surround back channel is mono)
or select 2ch if your DVD is outputting 7.1
sound (the surround back channel is stereo).

Coaxial digital input setting

Here you tell the receiver what component you have
hooked up to the coaxial digital input jack.
Press % or fi to select the coaxial digital
input (DVD, TV, CD, CD-R, VCR, or OFF).
After you assign the component to this digital jack
whenever you select that component, for example a
CD player, the receiver will automatically change to
the digital input setting. You can see this in the
DIGITAL/ANALOG indicator on the front of the
receiver.
MEMO:
• The initial setting is "
20
En
".
DVD
".
TV
".
DVD
Optical digital input 1 setting
Here you tell the receiver what component you have
hooked up to the optical input jack 1.
Press % or fi to select the optical digital
input 1 (DVD, TV, CD, CD-R, VCR, or OFF).
After you assign a component to this digital jack
whenever you select that component, for example a
CD player, the receiver will automatically change to
the digital input setting. You can see this in the
DIGITAL/ANALOG indicator on the front of the
receiver.
MEMO:
• The initial setting is "
CD"
Optical digital input 2 setting
Here you tell the receiver what component you have
hooked up to the optical input jack 2.
Press % or fi to select the optical digital
input 2 (DVD, TV, CD, CD-R, VCR, or OFF).
After you assign a component to this digital jack
whenever you select that component, for example a
CD player, the receiver will automatically change to
the digital input setting. You can see this in the
DIGITAL/ANALOG indicator on the front of the
receiver.
MEMO:
• The initial setting is "
CD-R
Optical digital input 3 setting (VSX-
D810S/VSX-D850S only)
Here you tell the receiver what component you have
hooked up to the optical input jack 3.
Press % or fi to select the optical digital
input 2 (DVD, TV, CD, CD-R, VCR, or OFF).
After you assign a component to this digital jack,
whenever you select that component, for example a
CD player, the receiver will automatically change to
the digital input setting. You can see this in the
DIGITAL/ANALOG indicator on the front of the
receiver.
MEMO:
• The initial setting is "
TV
.
".
".