Remote Control (Vsx-D710S/D810S) - Pioneer VSX-D710S Operating Instructions Manual

Displays & Controls
Remote Control
(VSX-D710S/D810S)
1
2
3
4
5
6
7
8
9
1 SOURCE
button
Use to turn on/off other components connected to
the receiver.
2 MULTI CONTROL buttons
Use to put the receiver/remote control in the stated
mode.
For other equipment controls, see Controlling the
Rest of Your System on pages 35-49.
3 RCV button (see page 16)
Use this button when setting up the surround sound
for the receiver. Also press it if you want to use
special features attached to some of the number
buttons, for example MIDNIGHT, 5.1/7.1, or ATT.
4 NUMBER/MODE buttons
Use the number buttons to select the radio frequency
in tuner DIRECT ACCESS (see page 32) mode or the
tracks in CD, DVD mode etc.
Also, buttons marked with the following names have
special functions. If you try to use one of these
functions but the display flashes it means that
function cannot be used in the current mode (for
24
example DSP modes cannot be used when 5.1 Ch
setting is on).
En
RECEIVER
SOURCE
DVD TV VCR CD-R
MULTI CONTROL
RCV CD TUN TVC
2 3
1
MIDNIGHT 5.1 / 7.1 ATT
5 6
4
EFFECT
8 9
7
10 DISC
0
ENTER
DTV INFO MPX/RETURN D.ACCESS GUIDE
3
¶
7 8
BAND CLASS DTV ON/OFF DTV MENU
1 ¡ 4
¢
2 /DTS DSP
TEST TONE SIGNAL SELECT
CH SELECT CH LEVEL FUNCTION
LOUDNESS MUTING
FL DIMMER SETUP
TUNE
ST ST
ENTER
TUNE
CHANNEL
VOLUME
MASTER VOLUME
MENU
TVFUNC
TV
TV CONTROL
AV PRE-PROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
MIDNIGHT (see page 31)
Use to put receiver in MIDNIGHT mode. To use first
press the
5.1 Ch (VSX-D710S) 7.1Ch (VSX-D810S/D850S)
(see page 31)
#
When the DVD/LD or DVD 5.1/7.1 Ch function is
selected each press switches the DVD/LD input
@
between DVD/LD and DVD 5.1/7.1 Ch. To use first
press the
ATT
When the overload indicator lights use this button to
attenuate (lower) the level of an analog input signal
and prevent distortion. To use first press the
button then operate this button.
!
EFFECT +/– buttons (see page 30)
Use to add or subtract the amount of effect in
different DSP sound modes (except 6 Ch Stereo) or
advanced listening modes.
To use first press the
buttons.
5 THE FOLLOWING BUTTONS ARE BOTH
CONTROLS FOR OTHER COMPONENTS (LIKE
A DVD PLAYER) AND DEDICATED TUNER
~
CONTROLS. THE TUNER CONTROLS ARE
EXPLAINED HERE. YOU CAN USE THEM
=
AFTER YOU HAVE PUSHED THE TUNER MULTI
CONTROL BUTTON.
BAND button (see pages 32, 33)
- Use to switch between the AM and FM band when in
TUNER mode.
CLASS button (see pages 33)
0
Use to switch between the three banks (classes) of
station memories.
MPX/RETURN button (see page 32)
Use to switch between auto stereo and mono
reception of FM broadcasts. If the signal is weak then
switching to MONO will improve the sound quality.
Also, this is the pause button for CDs, tapes, DVDs,
etc.
D. ACCESS button (see page 32)
Use to directly access a radio station by pressing the
number of the station you want.
DTV INFO button
Use to bring up information screens on a digital TV.
DTV MENU button
Use to bring up menus on a digital TV.
DTV ON/OFF button
Use to turn a digital TV on/off.
GUIDE button
Use to bring up the guides on a digital TV.
button then operate this button.
RCV
button then operate this button.
RCV
button then operate these
RCV
RCV