Operating Environment - Pioneer VSX-D2011-G Operating Instructions Manual

TWO VOLTAGE SELECTOR
SWITCHES (multi-voltage
model only)
Only multi-voltage model is provided with these
switches. Mains voltages in Saudi Arabia are 127
V and 220 V only. Never use this model with the
110 V setting in Saudi Arabia.
Only multi-voltage model is provided with
this(these) switch(switches).
European models are not pro-vided with these
switches.
The line voltage selector switches are on the rear
panel. Check that they are set properly before
plugging the power cord into the household wall
socket. If the voltage is not properly set or if you
move to an area where the voltage requirements
differ, adjust the selector switches as follows.
1. Use a medium-size screwdriver.
2. First, insert the screwdriver in the groove of the
larger voltage selector, and adjust so that the tip
of the groove points to the voltage value of your
area.
3. Next, insert the screwdriver in the groove of the
amaller voltage selector and adjust until the
voltage is the same as at the larger one.
TWO VOLTAGE SELECTORS
220V
110V 120−127V
110V
120-127V
CAUTION 220 V
Power source voltage is factory adjusted 220 volts. If
your
area is different, change voltage selectors settings.
230
240V
220V
230-240V

Operating Environment

Operating environment temperature and humidity:
+5°C – +35°C (+41°F – +95°F); less than 85%RH
(cooling vents not blocked)
Do not install in the following locations
• Location exposed to direct sunlight or strong
artificial light
• Location exposed to high humidity, or poorly
ventilated location
[For European model]
H045 En
3
En