Pioneer VSX-D2011-G Operating Instructions Manual page 29

4 ENTER button
Use this button to enter information concerning
the SYSTEM SETUP, listening mode or the
tuner.
5 STANDBY indicator
Lights when the receiver is in STANDBY mode.
(Please note that this receiver consumes a
small amount of power [0.7 W for the European
model and 0.9 W for the multi-voltage model] in
the standby mode.)
6 Remote sensor
Receives the signals from the remote control.
7 Display (See page 33)
8 MCACC indicator (see pages 13-15, 50)
Lights when the ACOUSTIC CAL EQ is on.
(After the AUTO SURROUND SOUND SETUP
has been completed the ACOUSTIC CAL EQ is
set on and this display will light.)
9 MULTI CH IN button
Use this button to select the component you
have hooked up to the MULTI CH IN terminals
(for example, a DVD-Audio player).
10 ACOUSTIC EQ button (see page 50, 99-
101)
Press to switch on/off and select the type of
acoustic calibration EQ.
11 MASTER VOLUME dial
Use to raise or lower the volume of the receiver.
12 MULTI JOG CONTROL buttons
SET UP
Press to switch the SYSTEM SETUP mode.
RETURN
Press to move back one step in the SYSTEM
SETUP process.
13 SIGNAL SELECT button (see page 45)
Press SIGNAL SELECT repeatedly to select one
of the following:
AUTO – If there are analog and digital signals
input, the receiver automatically selects the
digital signal.
DIGITAL – To select an optical or coaxial
digital signal.
ANALOG – To select an analog signal.
14 HI-BIT HI-SAMPLING button (see page
53)
Use this button to switch the HI-BIT
HI-SAMPLING mode on or off. Use to hear CD
and DVD, as well as other digital soundtracks at
a wider dynamic range, allowing for finer audio
reproduction.
Displays & Controls
15 SB CH MODE button (see pages 54)
Use this button to turn the surround back
channels ON/OFF/AUTO or switch the VIRTU-
AL SURROUND BACK mode between ON/
OFF/AUTO.
16 TUNER CONTROL buttons (See pages
57-65)
BAND
Press to select the AM or FM band.
CLASS
Press repeatedly to switch the preset station
classes.
SELECT
Switches the –/+ buttons between station
memory and frequency select modes.
–/+
Selects station memories or frequencies when
using the tuner.
TUNER EDIT
Press to memorize and name a station for recall
using the MULTI JOG and ENTER buttons.
17 CHARACTER/SEARCH button (See
pages 62-65)
Use to search for different program types in
RDS mode.
18 EON MODE button (see pages 64-65)
Use to search for different programs that are
transmitting traffic or news information (this
search method is called EON).
19 PHONES jack
Connect headphones for private listening (no
sound will be heard through the speakers).
20 SPEAKERS (A/B) button
The use of this button depends on how the
SURRBACK SYSTEM (see page 37) is set. If
NORMAL SYSTEM is chosen this button
toggles between A and OFF. If FRON Bi-AMP is
chosen this button toggles between A+B and
OFF. If SECOND ZONE is chosen this button
toggles between A, B, A+B and OFF.
21 TONE control buttons (see page 52)
TONE button
This button switches between TONE ON and
TONE BYPASS, which bypasses the tone
circuitry.
BASS/TREBLE button
Use to select whether the bass or treble will be
adjusted.
–/+ buttons
Use to adjust the frequency levels.
22 SET UP MIC jack (see page 13)
Plug in the set up mic here. This is very
important in order to set up your system and
get proper surround sound.
29
En