Remote Control Of Other Components; Setting Up The Remote Control To Control Other Components; Recalling Settings Stored In The Remote Control - Pioneer VSX-D2011-G Operating Instructions Manual

Remote Control of Other Components

Setting Up the Remote Control to Control Other
Components
In addition to controlling the receiver, the supplied remote control can operate your other components (VCR, TV,
DVD, CD, etc.) after you program it to do so. In this way, instead of fumbling with many different controls and
buttons, you only need to use one remote control. If your component(s) are listed in the remote control's
memory, simply follow the steps below. If your component(s) are not listed, or if you want the remote to learn
additional operations, you can use the learning mode to input the information from the remote controls supplied
with your other components.

Recalling Settings Stored in the Remote Control

The following steps show you how to recall the setting stored in the remote control. Once a setting is recalled
and the component assigned, you can use this remote to easily operate the component.
• To exit from the remote control setup mode at any time, press REMOTE SETUP.
memo
• See "Using Remote Control with Other Components" on pages 70 and 71 to operate your other
components.
• The display will disappear after one minute or so if no new commands are entered. Press any button
to wake up the remote and continue the process.
S0URCE
DVD/LD
3
VCR2
CD-R/
TAPE1
DIMMER
SIGNAL SEL
VIDEO SEL
SYSTEM SETUP
MENU
2,
TUNER EDIT
AUDIO
4-5
TUNING
1
STATION
4
CHANNEL
TV VOL
MOVIE
STEREO/
DIRECT
memo
The TUNER button cannot be assigned.
66
En
SETUP
TV SYSTEM RECEIVER
OFF
VCR1/
TV/SAT TV CONT
DVR
MULTI CONTROL
MULTI
VIDEO CD
OPERATION
MD/
TUNER RECEIVER
TAPE2
LOUDNESS TONE EFFECT/CH SEL
1 2 3 4
+
DNR BASS/TREBLE
5 6 7 8
–
+
HI-BIT 10 DISC
9 0
ENTER
DIRECT ACCESS SEARCH MODE
GUIDE
TOP MENU
TRACK
ENTER
EXIT
RETURN
MPX
TEXT ON RF ATT DISP MODE
¶ 8
SUB TITLE
– +
BAND TUNING
3 ¡
– +
TEXT OFF CLASS STATION
7 ¢
– +
CHANNEL
TV INPUT INPUT
TV CONTROL
MIDNIGHT VOLUME
TV CH
MULTI CH
INPUT
ACOUSTIC
MUSIC MUTE
EQ
MODE
SURROUND
REMOTE
1
SETUP
SB CH
ENTER
MODE
Î
1 Press the REMOTE SETUP button for
three seconds.
The REMOTE SETUP menu appears on the remote
display.
2 PRESET should be selected (if it isn't
use the 5∞ buttons to select it) and
press ENTER.
SELECT FUNCTION blinks in the display.
3 Press the MULTI CONTROL button
(for example, DVD/LD) you want to
set.
4 Use the 5∞ buttons to select the
component you want to set up.
Press ENTER.
MAKER appears in the remote control display.
5 Use the 5∞ buttons to select the
name of the company that makes
your component. (see pages 115-
116)
The company names appear in the remote control
display. If there is more than one component type for
that company that makes your component then –1, –2,
etc., will appear in the display. Choose one of the
types and see if that works.