Making Recordings; Making An Audio Or A Video Recording - Pioneer VSX-819H-S Operating Instructions Manual

Audio/video multi-channel receiver
Hide thumbs Also See for VSX-819H-S:
Table of Contents

Advertisement

Available languages

Available languages

Making recordings

Chapter 9:
Making recordings
Making an audio or a video
recording
You can make an audio or a video recording
from the built-in tuner, or from an audio or
video source connected to the receiver (such
as a CD player or TV).
Keep in mind you can't make a digital
recording from an analog source or vice-versa,
so make sure the components you are
recording to/from are hooked up in the same
way (see Connecting up on page 12 for more on
connections).
If you want to record a video source, you also
need to use the same type of connection for the
source as for the recorder. For example, you
can't record a component hooked up to
composite video jacks with a recorder hooked
up to the component video outputs (see
page 18 for more on video connections).
RECEIVER
INPUT SELECT
ZONE 2
RECEIVER
RECEIVER
ON/OFF
BD
BD
TV
TV
CD
CD
CD-R
CD-R
VIDEO
VIDEO
MULTI IN
iPod USB
iPod USB
DIMMER
Note
1 • The receiver's volume, balance, tone (bass, treble, loudness), and surround effects have no effect on the recorded signal.
• Some digital sources are copy-protected, and can only be recorded in analog.
• Some video sources are copy-protected. These cannot be recorded.
SOURCE
TV CONTROL
INPUT
DVR
DVR
CH
TUNER
TUNER
AUX
AUX
VOL
SIGNAL SEL
SIGNAL SEL
BD MENU
1
Select the source you want to record.
Use the MULTI CONTROL buttons (or INPUT
SELECT).
2
Select the input signal (if necessary).
Press the RECEIVER button then press
SIGNAL SEL to select the input signal
corresponding to the source component (see
page 41 for more on this).
3
Prepare the source you want to record.
Tune to the radio station, load the CD, video,
DVD etc.
4
Prepare the recorder.
Insert a blank tape, MD, video etc. into the
recording device and set the recording levels.
Refer to the instructions that came with the
recorder if you are unsure how to do this. Most
video recorders set the audio recording level
automatically—check the component's
instruction manual if you're unsure.
5
Start recording, then start playback of
the source component.
1
09
51
En

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vsx-819h-k

Table of Contents