Controlling The Rest Of Your System; Operating Other Pioneer Components; Setting The Remote To Control Other Components - Pioneer VSX-818V Operating Instructions Manual

Controlling the rest of your system

Chapter 9:
Controlling the rest of your
system
Operating other Pioneer
components
VSX-918V model only
Many Pioneer components have SR CONTROL
jacks which can be used to link components
together so that you can use just the remote
sensor of one component. When you use a
remote control, the control signal is passed
along the chain to the appropriate component.
Note that if you use this feature, make sure that
you also have at least one set of analog audio or
video jacks connected to another component
for grounding purposes.
C O N T R O L
OUT
IN
VSX-918V
Other Pioneer products
with CONTROL terminals
Remote
control
unit
Note
1 • If you want to control all your components using this receiver's remote control, refer to Setting the remote to control other
components below.
• If you have connected a remote control to the CONTROL IN jack (using a mini-plug cable), you won't be able to control this
unit using the remote sensor.
2 TV codes (for example, codes for TV, CATV, Satellite TV or DTV) can only be assigned to the TV or TV CTRL button.
CONTROL
IN
OUT
Connect to CONTROL
terminal of other
Pioneer products
Setting the remote to control
other components
Most components can be assigned to one of
the MULTI CONTROL buttons using the
component's manufacturer preset code
stored in the remote.
However, please note that there are cases
where only certain functions may be
1
controllable after assigning the proper preset
code, or the codes for the manufacturer in the
remote control will not work for the model that
2
you are using.
Note
• You can cancel or exit any of the steps by
pressing RECEIVER. To go back a step,
press RETURN.
• After one minute of inactivity, the remote
automatically exits the operation.
09
49
En