Table of Contents
Advertisement
Operator control at the device
3.7 Setting the on delay
100 ms on delay
With the power supply system shut down, bring DIP switch "STDA" into position "OFF" (left)
and "STDB" into position "ON" (right) in order to set the on delay to 100 ms.
STDA
STDB
Load-optimized on delay
With the power supply system shut down, bring both DIP switches "STDA" and "STDB" into
position "ON" (right) to activate load-optimized on delay.
STDA
STDB
70
Power supply system PSU8600
Manual, 05.2017, A5E36758446-3-76
Advertisement
Table of Contents
