Siemens PSU8600 Manual page 197

Data
Fill byte(s)
LED color
LED state
SITOP BUF8600 4 s/40 A and SITOP BUF8600 10 s/40 A
Data
Fill byte(s)
Fill byte(s)
Charging current
[10mA]
Load current [10mA]
Module operation state Operating state
Power supply system PSU8600
Manual, 05.2017, A5E36758446-3-76
Description
-
Actual LED color. Each
LED is represented by
2 bits:
Bit0/1: OK
•
Bit2-15: unused = 0
•
Actual display status of
the LEDs. Each LED is
represented by 2 bits:
Bit0/1: OK
•
Bit2-15: unused = 0
•
Description
-
-
Charge current
not supported (always 0)
Load current
not supported (always 0)
5 = NotFully Ready for buffer operation
ChargedReady as the energy storage
device of the buffer mod-
ule has been sufficiently
charged.
6 = NotFully Not ready for buffer oper-
ChargedNotReady ation as the energy stor-
age device of the buffer
module has not been
sufficiently charged and is
presently being charged.
0 LED is off.
1 LED lit green.
2 LED lit red.
3 LED lit yellow.
0 LED is off.
1 LED lights up.
2 LED flashes at 1 Hz.
3 LED flashes at 2 Hz.
0 = Off Buffer component is in the
"Off" operating state.
1 = Boot Buffer component is pow-
ering up.
2 = Full Complete buffer readi-
ness: The energy storage
device of the buffer com-
ponent is fully charged
(normal operation).
3 = Buffering The buffer component is
operating in the buffer
mode: The power supply
system is supplied via the
buffer component(s).
Engineering and remote access
7.6 Cyclic and acyclic data
Data type
Unsigned8
Unsigned16
Unsigned16
Data type
Unsigned16
Unsigned16
Unsigned16
Unsigned16
Unsigned8
197