AEG L82470BI User Manual page 8

8 www.aeg.com
C
Programme progress display: PREWASH
SPIN
• The programme progress display shows the different phases of the selected
• During washing, a black line blinks under the running phase indicator. At the
D
CHILD SAFETY LOCK
E
DELAY START
F The display shows the following information:
• Duration of the selected programme
• Delay start
• Incorrect option setting
• Alarm codes
• End of the programme
G
TIME SAVING
H
DOOR
• This indicator shows if the door can be opened:
I
Available options: PREWASH
, DRAIN , OVERDOSAGE
programme.
end of each phase, the line stops blinking and remains on
If the indicator
gent has been used.
- indicator.
– After setting a programme, the duration is displayed in hours and mi-
nutes (for example
– After the programme has started, the remaining time is updated every
minute.
– When setting a delay start, the display shows the delay time (20 hours
max.) for about 3 seconds (for example
the programme duration.
– The delay time value decreases by one unit every hour and then, one
hour before the end of the programme, the time decreases every mi-
nute.
– In case of wrong setting the display shows the message Err and the yel-
low light of Start/Pause button starts blinking.
– If an operating problems occur, the display can show some alarm codes,
for example
– At the end of the programme the display shows blinking zero
dicator disappears and the door can be opened.
- option indicator.
- indicator.
– The indicator is on: the door cannot be opened. The appliance is per-
forming a washing programme.
– The indicator is off: the door can be opened. The washing programme
is finished.
.
, MAIN WASH
.
comes on, it indicates that too much deter-
- indicator.
).
(see chapter «Troubleshooting»).
, STAIN , SENSITIVE
, RINSE
), and then it shows again
, the in-
, EXTRA RINSE
,