Setting A Programme; Starting The Programme - AEG L82470BI User Manual

10.2 Setting a programme

Turn the programme selector dial to the
required programme.
The programme dial determines the type
of washing cycle (e.g. water level, drum
movement, number of rinses) and the
washing temperature according to the
type of laundry.
The indicator of Start/Pause button starts
blinking.
The programme dial can be turned
either clockwise or anticlockwise.
Off = Reset programme/switching OFF
of the appliance
If you turn the programme
dial to another programme
when the appliance is
working, the yellow indicator
of button Start/Pause blinks
3 times. The display shows
the message Err to indicate
a wrong selection. The
appliance does not perform
the new set programme.
10.3 Setting the options
Depending on the programme, different
functions can be combined. Not all the
options are compatible among
themselves. A wrong selection is
indicated by the message
display and a blinking of the Start/Pause
button.
To set an option:
1. Press Options button: all the option
indicators appear on the display.
2. Press the same button to scroll all the
available options. Each option
indicator illuminates on the display
and starts blinking.
3. Press Ok button to activate and
confirm your choice. A black dash
appears under the selected indicator
to show that this option has been set.
4. Press button to deactivate the
option.
5. Once you have set the options, wait
a few seconds until the display gets
back to the default status. The
indicator of the set option stay on.

10.4 Starting the programme

Press button Start/Pause to start the
programme. The corresponding red
indicator stops blinking.
The indicator
door is locked. To interrupt a
programme which is running, press the
button Start/Pause: the corresponding
red light starts blinking.
To restart the programme from the point
at which it was interrupted, press Start/
Pause button again.
If you have chosen a delayed start, the
appliance will begin the countdown.
If you set an incorrect option, the yellow
indicator of button Start/Pause blinks for
3 times. The display shows the message
Err for some seconds.
10.5 Filling the detergent and
additives
on the
10.6 Starting a programme
with the delay start
Set this option before you press button
Start/Pause.
is on to indicate the
Compartment for prewash phase,
soak programme or stain remover.
Compartment for washing phase.
Compartment for liquid additives
(fabric conditioner, starch).
Maximum level for quantity of liquid
additives.
Always obey the instructions
that you find on the
packaging of the detergent
products.
ENGLISH 15