AEG 8000 OKOMIX 8KG User Manual
  1. Manuals
  2. Brands
  3. AEG Manuals
  4. Washer
  5. 8000 OKOMIX 8KG
  6. User manual

AEG 8000 OKOMIX 8KG User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

L8FC8432BI
USER
MANUAL
EN
User Manual
Washing Machine

Advertisement

Table of Contents
loading

Related Manuals for AEG 8000 OKOMIX 8KG

Summary of Contents for AEG 8000 OKOMIX 8KG

  • Page 1 L8FC8432BI User Manual Washing Machine USER MANUAL...

  • Page 2: Table Of Contents

    1369/2017........................43 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.

  • Page 3: Safety Information

    ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

  • Page 4: Safety Instructions

    & breakfast and – other residential type environments; areas for communal use in blocks of flats or in – launderettes. Do not exceed the maximum load of 8 kg (refer to the •...
  • Page 5 ENGLISH • The floor area on which the appliance necessary to change the mains plug is to be installed must be flat, stable, fuse, use only a 13 A ASTA (BS 1362) heat resistant and clean. fuse. • Make sure that there is air circulation •...

  • Page 6: Installation

    2.5 Service • Cut off the mains electrical cable close to the appliance and dispose of • To repair the appliance contact an Authorised Service Centre. • Remove the door catch to prevent • Use original spare parts only.
  • Page 7 ENGLISH 1. Put two polystyrene packaging elements on the floor under the appliance. WARNING! It is strongly recommended that this action is carries out by two persons. 2. Carefully put the appliance down on its rear side. Make sure not to damage the hoses.
  • Page 8 6. Remove the three bolts, the hose holders and plastic spacers by using the spanner supplied with the appliance. 7. Close the holes with the plastic caps you find in the user manual bag. Put the smallest cap F in upper hole and the two bigger caps G in lower holes.
  • Page 9 ENGLISH 3.5 Positioning and levelling 1. Install the appliance on a flat hard floor. WARNING! Make sure that carpets do not stop the air circulation below the appliance. Bring the appliance near the furniture recess before levelling it. For more details, refer to paragraph "Building in".
  • Page 10 The inlet hose 1. Remove the inlet hose from inside the drum. 2. To connect the water inlet hose towards the proper direction and with the proper inclination, check the position of the water tap before connecting it to the back of the appliance.
  • Page 11 ENGLISH To a stand pipe with vent-hole Directly into a drain pipe at a height of not Ø 40 mm less than 60 cm (23.6”) and not more than 100 cm (39.3”). The end of the drain hose must always be ventilated , i.e.
  • Page 12 If hoses run behind the 596 mm 553 mm appliance, make sure that nothing closes the small recess indicated with the measures 50 x 50 mm. 819 mm 50 mm 50 mm 140 mm 76 mm The appliance is also equipped with an adhesive sponge pad H that you can find inside the drum.
  • Page 13 ENGLISH 1. Remove the screws of the top cover on the rear of the appliance and install the anti- tilting device as shown in the drawing. 2. Adjust the anti-tilting device so that the distance from the counter is 10mm. Loosen ~10mm the nut counterclockwise with a 3mm wrench.
  • Page 14 Reversibility of the cupboard door Carry out the cupboard door reversibility before the appliance is built in completely. If the cupboard door has to be opened from left to right, invert the position of the hinge supports M with the magnetic plate N and lower plate O.
  • Page 15 ENGLISH Set the position of the lower hole respecting 16-22 mm dimensions and distances shown in the drawing (449 mm). Countersink the holes. Ø 35 mm 12,5 - 14 mm 22±1,5 mm 595-598 mm Hinges To mount the hinges it is necessary to drill two holes (dia.

  • Page 16: Product Description

    Counter-magnet The appliance is pre set for a magnetic closure. For a correct closure: 1. Position the screw C and the counter- magnet D on the magnetic plate N. Lean the cupboard door against the screw until it leaves a mark.

  • Page 17: Control Panel

    ENGLISH 5. CONTROL PANEL 5.1 Control panel description Temp. Time Save Start/ Pause Delay Spin Start Prewash Extra Rinse Soft Plus Plus Steam Stains Programme dial Soft Plus touch button Spin touch button Extra Rinse touch button Temp. touch button Stains touch button Display On/Off push button...
  • Page 18 The Temperature area: Temperature indicator . Cold water indicator. Child safety lock indicator. Door locked indicator. Delay start indicator. The digital indicator can show: • Programme duration (e. g. • Delay time (e. g. • Cycle end ( • Warning code (e.g.

  • Page 19: Dial And Buttons

    ENGLISH 6. DIAL AND BUTTONS 6.1 Introduction 6.5 Spin When you set a programme, the The options/functions are appliance automatically sets the not available with all maximum spin speed allowed, except for washing programmes. Check programme Denim. With this option you the compatibility between can decrease the default spin speed.
  • Page 20 Use this option for people with allergies In some programmes the rinses are to detergent residues and with sensitive performed with more water. skin. If you touch the Start/Pause button, This option increases the the appliance performs the only programme duration.
  • Page 21 ENGLISH 6.11 Child Lock very quick cycle for a smaller lightly soiled load (max. half load With this option you can prevent children recommended). from playing with the control panel. the shortest cycle to freshen up a To activate/deactivate this option, hold small amount of laundry.

  • Page 22: Programmes

    7. PROGRAMMES 7.1 Programme Chart Programme Reference Maxi- Programme description Default tem- spin speed (Type of load and soil level) perature Spin speed load Temperature range range Washing programmes 1400 rpm 8 kg White cotton and coloured cotton. Normal, (1400- 400 heavy and light soil.
  • Page 23 ENGLISH Programme Reference Maxi- Programme description Default tem- spin speed (Type of load and soil level) perature Spin speed load Temperature range range 1 kg Cottons, Synthetics, Delicates. Short and gen- tle steam programme to refresh even your very Steam delicate garments, including very delicate gar- ments with sequins, lace etc.
  • Page 24 Programme Reference Maxi- Programme description Default tem- spin speed (Type of load and soil level) perature Spin speed load Temperature range range 1200 rpm 3 kg Cotton and synthetic items lightly soiled or (1200- 400 once worn. 20min 3kg rpm) 30 °C...

  • Page 25: Settings

    ENGLISH Programme ■ ■ ■ ■ ■ ■ ■ Delicates ■ ■ ■ ■ ■ ■ OKOPower ■ ■ Steam Spin/Drain ■ ■ ■ ■ ■ ■ ■ ■ Rinse ■ ■ ■ ■ ■ ■ ■ ■ ■ Anti-allergy ■...

  • Page 26: Before First Use

    • You make an invalid selection (3 short completed, touch the Prewash and the sounds). Stains buttons simultaneously for about 2 • The programme is completed seconds. The display shows On or Off. (sequence of sounds for about 2 If you deactivate the minutes).
  • Page 27 ENGLISH 10.3 Filling the detergent and additives 2. Press the lever down to remove the dispenser. 3. To use powder detergent, turn the flap up. - Compartment for prewash phase, 4. To use liquid detergent, turn the flap soak programme or stain remover. down.
  • Page 28 Make sure that the flap does not cause a When the countdown is completed, the blockage when you close the drawer. programme starts automatically. Cancelling the delay start after 10.5 Setting a programme the countdown has started 1. Turn the programme dial to select To cancel the delay start: the desired washing programme.
  • Page 29 ENGLISH In this case, for 30 seconds, it is possible If the ProSense System has to pause the appliance and remove the completed and the water exceeding garments. filling has already started, the new programme starts Once removed the exceeding garments, without repeating the touch the Start/Pause button to start the ProSense System.

  • Page 30: Hints And Tips

    The indicator of the Start/Pause button The option indicator Rinse Hold goes off. disappears. The door unlocks and the indicator If you have set Silent goes off. the spin speed is not 1. Press button On/Off to deactivate changed, when you press the appliance.
  • Page 31 ENGLISH • Follow the washing instructions on the – powder detergents for all types of laundry care labels. fabric, excluding delicate. Prefer • Do not wash white and coloured powder detergents containing items together. bleach for whites and laundry • Some coloured items can discolour sanitization with the first wash.

  • Page 32: Care And Cleaning

    12. CARE AND CLEANING 12.4 Door seal with double lip WARNING! trap Refer to Safety chapters. This appliance is designed with a self 12.1 External cleaning cleaning draining system, allowing light fluff fibers that fall off the clothes to be...
  • Page 33 ENGLISH 1. Remove all laundry from the drum. 2. Run a Cottons programme with the highest temperature. 3. Add a small quantity of powder detergent into the empty drum, in order to rinse out any left residues. Occasionally, at the end of a cycle the display may show the icon : this is a...
  • Page 34 Regularly check the drain WARNING! pump filter and make sure • Do not remove the filter that it is clean. while the appliance operates. Clean the drain pump if: • Do not clean the pump if • The appliance does not drain the the water in the water.
  • Page 35 ENGLISH 180˚ 3. Turn the filter 180 degrees in anti-clockwise direction to open it, without removing. Let the water flow out. 4. When the bowl is full of water, turn the filter back and empty the container. 5. Repeat the steps 4 and 5 until the water stops to flow out.
  • Page 36 9. Put the filter back into the special guides by turning it clockwise. Make sure that you tighten the filter correctly to prevent leakages. 10. Close the pump cover. When you drain the water with the emergency drain procedure, you must activate the drain system again: 1.

  • Page 37: Troubleshooting

    ENGLISH 45° 20° 12.9 Emergency drain remaining water from the inlet hose and the drain pump. If the appliance cannot drain the water, 1. Disconnect the mains plug from the carry out the same procedure, described mains socket. in 'Cleaning the drain pump' paragraph. 2.
  • Page 38 • - No communication between electronic elements of the appliance. Switch it off and switch on again. The programme was not finished properly or the appliance stopped too early. If the alarm code appears again, contact the Authorised Service Centre.
  • Page 39 ENGLISH Problem Possible solution • Make sure that the water tap is open. • Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority. • Make sure that the water tap is not clogged. The appliance does not •...
  • Page 40 Problem Possible solution • Make sure the levelling of the appliance is correct. Refer to The appliance makes an "Installation instruction". unusual noise and vi- • Make sure that the packaging and/or the transit bolts are brates. removed. Refer to "Installation instruction".

  • Page 41: Consumption Values

    ENGLISH 2. Disconnect the mains plug from the 4. Take out the laundry and then close mains socket. the appliance door. 3. Pull twice the emergency unlock trigger downward and open the appliance door. The emergency unlock trigger is located where indicated by the following picture.

  • Page 42: Technical Data

    Programmes Load Energy Water Approxi- Remain- (kg) consump- consump- mate pro- ing mois- tion (kWh) tion (litre) gramme ture (%) duration (minutes) Standard cotton programmes 0.63 Standard 60°C cotton 0.44 Standard 60°C cotton 0.42 Standard 40°C cotton 1) At the end of spin phase.

  • Page 43: Product Information Sheet In Reference To E.u. Regulation 1369/2017

    ENGLISH 16. PRODUCT INFORMATION SHEET IN REFERENCE TO E.U. REGULATION 1369/2017 Product Information Sheet Trade Mark Model L8FC8432BI, PNC914580400 Rated capacity in kg Energy efficiency class A+++ Energy consumption in kWh per year, based on 220 standard washing cycles for cotton programmes at 60 °C and 40 °C at full and partial load, and the consumption of the low-power modes.
  • Page 44 Programme time of the "standard 40°C cotton pro- gramme at partial load in minutes Duration of the left on mode in minutes Airborne acoustical noise emission in db(A) washing Airborne acoustical noise emission in db(A) spinning Built in appliance Y/N The information given in the chart above is compliant with the EU Commission regulation 1015/2010 implementing directive 2009/125/EC .
  • Page 45 ENGLISH...
  • Page 46 www.aeg.com...
  • Page 47 ENGLISH...
  • Page 48 www.aeg.com/shop...

This manual is also suitable for:

L8fc8432bi8000 okomix

Table of Contents