Table of Contents
Advertisement
/Basic Operations
I
/i
Turning on the power (Standby)
1
Press POWER on tile Plasma Display if tile STANDBY
indicator
is off.
• The STANDBY indicator on the Plasma Display lights
up red.
2
Confirm that the STANDBY indicators
light up red, and
then press TVdDon the remote control unit or
STANDBY/ON
on the Plasma Display or POWER on the
Media Receiver to turn the system on.
• The POWER ON indicators
on the Plasma Display and
Media Receiver light up green.
[]
NOTE
• In this manual, "system" means the Plasma Display Panel and Media
Receiver,
Plasma
Display
LL
,.,,,
-'
STANDBY indicator
POWER ON indicator
POWER button
H]ustrationshows PDP-5045HD/4345HD,
(right view)
Turning
off the power
(Standby)
1
Press TV _ on the remote
control
unit or STANDBY/ON
on the Plasma Display or POWER on the Media Receiver.
• The system enters the standby mode and the image on
the screen disappears.
• Both STANDBY indicators
light up red.
• It is recommended
to place the system into the standby
mode by pressing TV dOon the remote control unit.
This allows the system to automatically
receive digital
TV program information
in the standby mode.
NOTE
• If you are not going to usethis system for a long period of time, press
POWER on the Plasma Display and remove the power cord from the
power outlet.
STAN DBY/
ON button
/
Media
Receiver
_I=):_ER
_
i|:_:NDSY
i ndicator
....................
_
POWER
button
Plasma
Display/Media
Receiver
status
indicators
Plasma Display
Media Receiver
POWER ON
STANDBY
POWER ON
STANDBY
Powerto the PlasmaDisplay and Media Receiveris off. Or the power cords
havebeen disconnected.
_*_
_0_ _
Powerto the system is on.
_O_
The system is in the standby mode.
_,[-
The power cord has been disconnected from the Media Receiver.
Flashing
.
_,0[ _
Powerto the PlasmaDisplay is off. Or the power cord has been disconnected
Flashing
from the PlasmaDisplay.
For other than the above, see "Troubleshooting" on page 69.
L
ER
Hide quick links:
Advertisement
Table of Contents
