Recording Mode - Pioneer DVR-650H-S Operating Instructions Manual

Copying and backup
– the recorder is reset to its factory
settings (see Resetting the recorder on
page 131).
• It may not be possible to copy from a
DVD disc that was recorded on a
different DVD recorder or a PC.
HOME
MENU
1 Select 'Copy' from the Home
Menu.
ENTER
2 Select 'DVD/CD
ENTER
3 Select a Copy List type.
• Selecting Create New Copy List will
erase any Copy List already stored in the
recorder.
ENTER
4 Add titles to the Copy List
(highlight a title and press ENTER to add).
Titles you've added to the Copy List are
highlighted in pink.
ENTER
5 Select 'Next' from the
command menu panel to proceed to the
title edit screen.
ENTER
6 Select a title to edit.
A menu appears of Copy List editing
commands:
• Erase – Erase individual titles from the
Copy List (see Erase on page 68).
• Move – Change the order of titles in the
Copy List (see Move on page 74).
• Preview – Check the content of a title in
the Copy List.
Note
1 When copying to a DVD-R/-RW (Video mode) or DVD+R/+RW, the chapter markers in the copy may not be in
exactly the same position as the original.
2 When the copy mode is set to something other than High-Speed Copy for copying to a DVD-R/-RW (Video mode)
or DVD+R/+RW, the chapter markers of the original are not copied. Chapter markers are put into the copy at
regular intervals, according to the Auto Chapter setting (see also Auto Chapter (Video) and Auto Chapter
(DVD+R/+RW) on page 110).
3 When copying to a DVD+R/+RW, MN1 to MN3 and SEP modes are not available.
4 XP+ mode available only when copying to HDD.
• Cancel – Exit the menu.
Repeat this step for as many titles you have
that need editing.
7
command menu panel to proceed to the
copy options screen.
• Select Recording Mode if you want to
change the recording quality (see
Recording Mode below).
HDD'.
8
copying.

Recording Mode

1
the command menu panel.
2
the copy.
• High-Speed Copy
copied at the same recording quality as
the original.
• XP, SP, LP, EP, SLP, SEP, MN
List is copied at the specified recording
quality in real-time. (Note that if you copy
at a higher quality setting than the
original, the copy will not be better
quality than the original.)
If you select MN above, you can also
change the level setting (MN1 to
MN32
Recording Quality box that appears.
ENTER
Select 'Next' from the
ENTER
Select 'Start Copy' to start
ENTER
Select 'Recording Mode' from
ENTER
Select a recording mode for
1
– The Copy List is
3 4
, LPCM or XP+
) from the
09
2
– The Copy
83
En