Using Other Types Of Video Output - Pioneer DVR-650H-S Operating Instructions Manual

Connections
Using other types of video
output
This recorder has standard (composite),
S-video and component video outputs. The
main difference between them is the quality
of the picture. S-video delivers a better
picture than composite video, while
component video gives better picture quality
still. The variety of outputs also gives you the
flexibility of connecting your particular
equipment using the best connection type
available.
To component video input
2
TV
S-VIDEO
OUTPUT
ANTENNA
AUDIO VIDEO
R L
IN
OUTPUT 2
INPUT 3
S-VIDEO
S-VIDEO
AUDIO VIDEO
R L
CONTROL
IN
OUT
Y P
INPUT 1/AUTO START REC B P R
COMPONENT VIDEO OUT OUTPUT 1
COMPONENT
VIDEO OUT
1
S-video carries the picture as separate
colour and luminance (brightness) signals.
There are two S-video outputs for connection
to TVs, monitors, VCRs or other equipment.
•
connect an S-VIDEO OUTPUT (1 or 2) to
an S-video input on your TV, monitor (or
other equipment).
2
video output
Component video carries the picture as two
separate colour signals, plus a luminance
(brightness) signal.
See also Component Video Out on page 106
for how to set up the component video
To S-video input
output for use with a progressive scan-
compatible TV.
1
•
supplied) to connect the COMPONENT
VIDEO OUT jacks to a component video
DIGITAL
AUDIO OUT
input on your TV, monitor (or other
AC IN
HDMI OUT COAXIAL
equipment).
Connecting using an S-video output
Use an S-video cable (not supplied) to
Connecting using the component
Use a component video cable (not
02
17
En