Power Off - Pioneer DVR-650H-S Operating Instructions Manual

Recording
Checking/editing timer recording
settings
You can check and/or edit the timer
recording settings made by the VCR Plus+
system by selecting Details from the
PlusCode# setting screen.
ENTER
1 Select 'Details' from the
PlusCode# setting screen.
The Timer Programme Set screen appears,
filled out with the timer recording details.
2 Check and edit the fields as
necessary.
See Setting a manual timer recording on
page 42 for more on this.
ENTER
3 Select 'Store Programme' to
save the timer programme and exit.
VCR Plus+ programming with the

power off

You can enter a PlusCode programming
number when the recorder is in standby.
Note that the recording is always made to
the HDD. If you want to record to a DVD disc,
you'll need to switch on the power and use
the full VCR Plus+ programme screen.
Important
• You can't use this feature until you have
set up the guide channels. See VCR
Plus+ CH Setting on page 106.
• You can't change the recording mode.
• You can't program daily or weekly timer
recordings.
1 Press 'VCR Plus+'.
The front panel display shows the current
recording mode and prompts you to enter
the PlusCode programming number.
2 Use the number buttons to enter the
number.
• To clear the last digit entered, press
CLEAR.
3 Press ENTER.
The display shows the timer settings:
Date Start time
Recording channel
• If CODE ERROR appears in the display,
check that the number is correct and
that the guide channel is set (see VCR
Plus+ CH Setting on page 106), then set
the timer recording again.
• If CAN'T SET appears in the display, it
means that although you entered a valid
number, the programme has already
finished.
End time HDD and
Recording mode
05
41
En