Connecting To A Cable Box Or Satellite Receiver (2) - Pioneer DVR-650H-S Operating Instructions Manual

Connections
Connecting to a cable box or
satellite receiver (2)
If many or all the channels you receive by
cable or satellite are scrambled, we
recommend using this setup.
Using the setup on this page you can:
• Record any channel by selecting it on
the cable box/satellite receiver.
• Record using the Auto Start Recording
feature (see Automatic recording from a
satellite tuner on page 47).
Important
• Do not connect this recorder 'through'
your VCR, satellite receiver or cable box.
Always connect each component
directly to your TV or AV amp/receiver.
Note
1 • The setup on this page does not allow you to watch one channel and record another.
• The diagram shows standard video connections, but you can alternatively use the S-video or component video
connections if they're available.
From antenna output
1
ANTENNA
IN (RF IN)
ANTENNA
1
1
This enables you to watch and record TV
channels.
2
OUTPUT jacks (1 or 2) on this recorder to
a set of audio/video inputs on your TV
using a set of A/V cables (as supplied).
This enables you to watch discs.
3
your cable box/satellite receiver to the
INPUT 1 jacks on this recorder using a set
of A/V cables.
This enables you to record scrambled TV
channels.
1
Antenna/cable TV
wall outlet
To antenna input
Cable box/
Satellite receiver
3
INPUT 1/AUTO
START REC
ANTENNA
AUDIO VIDEO
R L
IN
OUTPUT 2
INPUT 3
S-VIDEO S-VIDEO
AUDIO VIDEO
R L
CONTROL
IN
OUT
INPUT 1/AUTO START REC Y P B P R
COMPONENT VIDEO OUT OUTPUT 1
OUTPUT 1
OUT
To antenna input
TV
Connect RF antenna cables as shown.
Connect the AUDIO and VIDEO
Connect the audio/video output of
02
From audio/
video output
DIGITAL
AUDIO OUT
AC IN
COAXIAL
HDMI OUT
2
To audio/video input
19
En