On-Screen Displays And Recorder Displays - Pioneer DVR-640H-S Operating Instructions Manual

Additional information
Problem
The picture freezes and
the front panel and
remote control but-
tons stop working
A device connected via
USB does to function.
DVR-640H-S only
If the unit does not operate normally due to external effects such as static electricity, disconnect
the power plug from the outlet and insert again to return to normal operating conditions.

On-screen displays and recorder displays

The table below shows a list of error messages that you may encounter when using the
recorder and an explanation of their meaning.
Message
• Initializing disc. Please wait a
moment.
• Incompatible region number.
• Cannot record any more titles.
• No more space for file management
data.
• This disc cannot be recorded. Undo
the finalization.
Remedy
• Press STOP then try restarting playback.
• Press the front panel
off, then switch back on and restart playback. If the power fails to
switch off, press and hold
power switches off.
• Check that it is a device that may be connected to this unit (digital
camera, USB memory, memory card reader or printer).
• Use a USB cable less than 5 m in length.
• Check that the USB cable is inserted fully.
• Check that the USB device is powered on.
• Only the first digital camera, USB memory or memory card reader
connected is readable by this unit. Unplug multiple devices and
connect the device you want to use first.
Explanation/Action
When you load a blank DVD-RW or DVD+RW disc,
the recorder automatically initializes it.
The disc loaded has an incompatible region
number for the recorder and so will not play.
The disc control data limit has been reached, or
the maximum number of chapters and/or titles
has been reached. Erase titles/chapters or
combine chapters.
The disc was finalized on a non-Pioneer DVD
recorder. Undo the finalization in order to
recording/editing.
STANDBY/ON button to switch the power
STANDBY/ON for 5 seconds until the
15
127
En