On-Screen Displays And Recorder Displays - Pioneer DVR-645H-S Operating Instructions Manual

DVR645H_WY_EN.book 153 ページ ２００６年７月５日 水曜日 午前１０時２５分
Additional information
Problem
No video from the
HDMI output.
There's no sound from
the connected HDMI or
DVI device.
If the unit does not operate normally due to external effects such as static electricity, disconnect
the power plug from the outlet and insert again to return to normal operating conditions.

On-screen displays and recorder displays

The table below shows a list of error messages that you may encounter when using the
recorder and an explanation of their meaning.
Message
• Initializing disc. Please wait a
moment.
• Incompatible region number.
• Cannot record any more titles.
• No more space for file management
data.
• This disc cannot be recorded. Undo
the finalization.
Remedy
If you choose a setting that is incompatible with your TV you may not
be able to see any picture at all. In this case, press
holding down the ( STOP ) button on the front panel to switch the
setting (this also switches Component Video Out on page 135 to the
default setting).
• There is no sound when using a DVI terminal.
• Some HDMI-compatible devices do not output sound (check with
the manual that came with the connected device).
Explanation/Action
When you load a blank DVD-RW or DVD+RW disc,
the recorder automatically initializes it.
The disc loaded has an incompatible region
number for the recorder and so will not play.
The disc control data limit has been reached, or
the maximum number of chapters and/or titles
has been reached. Erase titles/chapters or
combine chapters.
The disc was finalized on a non-Pioneer DVD
recorder. Undo the finalization in order to
recording/editing.
17
( PLAY ) while
153
En