Pioneer DVR-640H-S Operating Instructions Manual page 112

The Initial Setup menu
14
Setting
G-Code CH Setting
Video In/Out Settings
Input Colour
System
See also About the input color system on page 120 for more information on this setting.
Component Video
Out
NTSC on PAL TV
Many recent PAL TVs are compatible with NTSC input and so this setting can be switched off. Check the operating
instructions that came with your TV. See also About NTSC on PAL TV on page 120 for related information.
Audio In
NICAM Select
Tuner Level
112
En
Options Explanation
Next Screen Proceed to the next screen to assign channel
numbers to the guide channels as necessary. Look in
your TV guide to see which channel numbers should
be assigned to which guide channels. Press ENTER
when your done to leave this screen.
Next Screen Proceed to the next screen to set the input colour
system for the external input and the built-in TV
tuner. Use the
On the default Auto setting the recorder can gener-
ally correctly detect whether the input signal is PAL,
SECAM, 3.58 NTSC or PAL-60, but in some cases you
may have to set it manually if the picture is displayed
incorrectly.
Interlace • Select if your monitor/TV is not compatible with pro-
gressive-scan video.
Progressive
Select if your monitor/TV is progressive-scan compat-
ible. Check the operating instructions that came with
your monitor/TV if you're not sure.
On
NTSC discs will play correctly on PAL-only TVs.
Off •
Use if your TV is already NTSC-compatible.
NICAM • Record the NICAM audio in a NICAM broadcast.
Regular Audio
Record the non-NICAM audio in a NICAM broadcast.
(You can still switch the audio to record using the
AUDIO button before recording.)
Normal •
Standard setting.
Compression Use if the audio level from the built-in tuner is exces-
sive, causing distortion.
CH +/–
buttons to change the preset.