Using Other Types Of Video Output - Pioneer DVR-640H-S Operating Instructions Manual

Connecting up
Using other types of video
output
This recorder has standard (composite), S-
video and component video outputs. The
main difference between them is the quality
of the picture. S-video delivers a better
picture than composite video, while
component video gives better picture quality
still. The variety of outputs also gives you the
flexibility of connecting your particular
equipment using the best connection type
available.
S-VIDEO
INPUT
1
TV
AC IN
DIGITAL CONTROL
OUT
COAXIAL IN COMPONENT
VIDEO OUT
Connecting using an S-video
1
output
S-video carries the picture as separate color
and luminance (brightness) signals.
There are two S-video outputs for connection
to TVs, monitors, VCRs or other equipment.
• Use an S-video cable (not supplied) to
connect an S-VIDEO OUTPUT (1 or 2) to
an S-video input on your TV, monitor (or
other equipment).
COMPONENT
INPUT
2
Y IN
OUTPUT 1 INPUT 1/AUTO START REC OUTPUT 1
R L R L
P
B
OUT
P
R
ANTENNA
AUDIO VIDEO AUDIO VIDEO
S-VIDEO S-VIDEO
OUTPUT 2 INPUT 3
2 Connecting using the component
video output
Component video carries the picture as two
separate color signals, plus a luminance
(brightness) signal.
See also Component Video Out on page 112
for how to set up the component video
output for use with a progressive scan-
compatible TV.
• Use a component video cable (not
supplied) to connect the COMPONENT
VIDEO OUT jacks to a component video
input on your TV, monitor (or other
equipment).
02
17
En