The PhotoViewer (DVR-540H-S)
11
• Large picture files may take a few
seconds to display. This is normal.
STOP
3
Press to return to the thumbnail
view area.
• You can also use the RETURN button.
4
Press to return to the folder view
RETURN
area.
• With the leftmost thumbnail highlighted,
you can use the
• To exit the PhotoViewer, press HOME
MENU.
Reloading files from a disc
If you have a disc with more than 1000 files
and/or 100 folders, you can still view all the
images using the reload function.
1
Navigate to the last entry in
the folder list ('Read next: ...').
2
Load the next batch of up to 999
ENTER
files/99 folders from the disc.
• It will take a moment (at most a few
minutes) to load in the images.
Note
1 You can press HOME MENU to exit the PhotoViewer screen while the recorder is reloading images. (If you enter
the PhotoViewer again, it will resume reloading.)
102
En
button.
1
Zooming an image
During a slideshow you can zoom in to
enlarge a portion of the picture by a factor of
two or four. You can also move the area of
the picture displayed.
1
Press during the slideshow to
ENTER
zoom the picture.
Repeated presses cycle between zoom off,
2x zoom and 4x zoom. The zoom factor is
displayed on-screen.
2
Use to move the zoomed
area.
Rotating an image
You can rotate the displayed picture during a
slideshow so you can always view pictures
the right way up, whichever way they were
taken.
ANGLE
•
Press during the slideshow to
rotate the displayed picture clockwise by
90º.
Press repeatedly to continue rotating the
picture in increments of 90º.