Radio Shack PRO-652 User Manual page 112

Detailed Menu Reference
SRVC
Parameter
EXPERT BELOW
Modulation
Atten
Delay
Delay Time
Zeromatic
Search Dir
Hit Count
Options
Auto, AM, FM, Modulation setting for the SRVC search. In
NFM most cases Auto will work fine. Use AM to
override and force AM modulation, FM to
force FM modulation, NFM to force narrow
FM modulation.
On or Off When on, applies 20 dB of attenuation to
all hits received on the SRVC search. Useful
in areas where interference from nearby
strong signals is present.
On or Off Controls whether a Delay is used to wait
for reply traffic after a transmission on the
SRVC search.
1-250 x 100ms Sets the amount of time (in 100 millisecond
intervals) for the wait for reply delay if Delay
is On, e.g., 20=2 seconds.
On or Off When on, enhances the scanner's ability to
lock on to the actual center frequency of a
search hit instead of an adjacent frequency.
Up or Down Sets search direction used when SRVC
object is active.
Numeric value Increments each time a transmission is
received on the SRVC object. Global "Hit
Counts" must be set to ON. Press the
Dflt
112
Description
softkey to reset to 0.
STLK
The S
or ed
Pa
Scan
Type
Sub-b
Tag
L/Ou
LED
LED
Latch