Dashboard Installation - Radio Shack PRO-652 User Manual

3. Attach the mounting bracket
to your vehicle's surface using
the supplied screws and
lockwashers.
Note: Do not use the rubber feet if
you are mounting the bracket with
screws.

Dashboard Installation

If you are unsure how to install your scanner in your vehicle, consult
your automobile manufacturer, dealer, or a qualified installer.
To mount in your dashboard, you must connect an external antenna
and speaker.
1. Before installing, confirm your scanner fits in the desired
mounting area and you have all the necessary materials. Your
scanner requires a 2 x 7
2. Remove the four rear screws and pull off the black case before
installing your scanner.
3. Install the DIN sleeve into the opening in your dashboard, lip
facing out.
4. Push out the top and bottom tabs to hold the sleeve firmly in place.
5. Slide the scanner into the sleeve until it locks in place.
/ x 5 / inch (50 x 180 x 135 mm) space.
1 5
8 16
17
Scanner Setup