1. Turn off the scanner, then turn it on again.
The scanner briefly displays the DSP boot version, and then the
on.
Welcome/Owner screen is displayed.
2. Press 0 while the scanner is displaying the Welcome/Owner
se
screen. The scanner displays:
se
ors
nd.
n
3. Press 2. The scanner displays:
of
C
ner's
ware
try
4. Press ENT. The scanner displays:
port
can
osing
ade
5. Press any key on the keypad to proceed. The scanner will reboot
with file system and global parameters reset to factory defaults.
d by
System Tests:
Select a Test...
Exits if no key
is pressed
Init GLOB data
To factory state
ENTER if APPROVE
CLEAR to EXIT
GLOB EEPROM area
Initialized to
defaults.
Press any key.
91
Additional Information